At Last, The Secret To Pick The Best Suction Pool Cleaner Is Revealed

Suction pool cleaners are usually attached to the suction side of your plumbing. Suction sides are the fittings and pipes that remove water from the pool to be filtered. The water is normally sucked from the pool by the filter pump.

A suction cleaner is connected to the hole in the skimmer below the basket. These cleaners are very effective when cleaning. This article covers all that you need to know about best suction pool cleaner available in the market.

Using Suction Pool Cleaners

Difference between suction cleaner, robotic cleaner and pressure cleaner

Pressure automatic pool cleaners

These normally use water pressure to move them around the pool. They are very common due to their good service. They require a booster pump and their debris bags should be cleaned frequently. You can use them to clean the bottom of your pool.

Robotic Cleaner

They are the best cleaners as compared to the other types. Robotic cleaners are popular because they can clean any part of the swimming pool including the sides.

Most of them contain self-contained units that climb on the pool to remove debris. For them to work effectively, you must keep changing the debris bag. Additionally, they clean very fast.

Suction pool cleaner

They are the most common type of cleaner as compared to other types. You can connect the swimming pool pump with the skimmer. These cleaners are very effective and are usually used to clean the bottom of the pool.

Troubleshoot Suction Cleaners

How to Troubleshoot Suction Cleaners

  • Suction cleaner not moving – Ensure that the hose is strongly connected to the skimmer on the suction line. You may also need to check hose sections to ensure that there are no air leaks at the hose meeting point. Also check whether the diaphragm  has tears or blockage.
  • The cleaner is slow–  This may occur if the skimmer basket or pool filter is congested. There may also be a clog at the bottom of the cleaner. Ensure that there are no hindrance in the hose. All hose links should be secured.
  • The cleaner moves too fast – If you have a powerful pool pump o the water flow is moving fast, the cleaner may move faster. Most of the suction cleaners have a speed control valve which allows you to control the flow.
  • Cleaner not able to cover the entire pool–  You may need to check the length of the suction hose. In case it’s too short you may increase the length by using a longer hose. You can also exchange the ends of the hose. Make sure you exchange the hose weight too.
  • Suction cleaner getting filled with leaves– Some suction cleaners are not appropriate for large leaves. You may consider using a robotic cleaner or a pressure cleaner.
  • Cleaner not able to climb the walls– You may adjust the float position. Ensure that the float is 24’’ away from the cleaner. This may also occur when the water level is too low or when the hoses are too short.
  • Not able to clean the bottom of the pool–  This may happen if the brushes are damaged or worn. You should replace the brushes regularly.
  • Hose problems– if the hose usually get tangled when cleaning the pool, it may be due to incorrect storage. Always ensure that the hose is wrapped properly.

Advantages of suction pool cleaners

  1. They are effective in cleaning. These cleaners are able to remove even the smallest debris that causes water to look cloudy.

  2. They are more affordable compared to other models.

  3. You can use them to clean any part of the swimming pool. They are able to climb to clean all sides of the pool.

  4. They clean fast.

Disadvantages of Suction pool cleaners

  1. You will require a lot of time to clean and maintain your pump since all dirt and debris are taken to the filter basket.
  2. They are not appropriate for pools with a lot of large floating debris.

Factors to consider when buying a suction pool cleaner

  • Size of the swimming pool-  You can go for an automatic cleaner if you have a large pool or consider manual cleaner on small pools.

  • Level of dirt and debris – Consider the amount of dirt and debris that need to be removed from the pool. You may also need to consider the type of dirt that gets to your pool. For example, you can consider a cleaner that is able to get rid of leaves or a cleaner that is able to remove even the smallest particles.

  • Power supply – Some cleaners may require a lot of electricity while others use rechargeable batteries.

  • Maintenance – You should consider how different cleaners are supposed to be maintained. Consider the time you need to set up and use when cleaning the pool.

May this guide in choosing the best suction pool cleaner was able to help you.

0
Shares
Click Here to Leave a Comment Below 0 comments